Pollution free etching spray for most usual types of lacquer. Montana REMOVER spray dissolves and removes lacquers quick and thoroughly. Do not use on cars! Application is possible on many surfaces such as walls clay bricks stone concrete surfaces marble asphalt glass metal and wooden surfaces. It becomes a gel-like consistency to keep from running off vertical surfaces. Application on non-ferrous metals might cause discoloration. Content is ph-neutral.
USE: Surfaces should be dry clean of dust oils and rust before paint application. Check the firmness and stability of the basic color on painted or lacquered grounds at an inconspicuous spot. Sensitive areas which you do not want to treat should be covered carefully with a protective sheeting. Spray generously and let act for approx. 10 - 15 minutes. Depending on quality and age of the paint you want to remove the acting time can be shortened or extended up to 24 hours. Then scrape off with a suitable tool. If necessary wash off with cellulose nitrate dilutent or just with water. In case of very porous grounds use a wire brush. If necessary repeat the procedure. Before application of new paint all residues of Montana REMOVER have to be removed.